Prefabricated Steel Structure Beer Processing Plant/Steel Structure
Warehouse With Eps Sandwich Panel
With the rapid development of industrial construction, lightweight
steel structure warehouses and workshops have been widely used.
Steel structure warehouses and workshops have obvious advantages:
light weight, high strength, large span, and environmental
protection. The steel structure warehouse and workshop structure in
this solution are mainly composed of horizontal structure and
vertical structure system. The horizontal structural system is
based on the bent frame (including roof trusses, beams and columns)
as the basic load-bearing structure, and can withstand roof loads,
lateral wind loads and earthquakes, as well as vertical loads and
horizontal horizontal loads of cranes. The longitudinal structural
system is composed of columns, inter-column supports, wall beams,
etc. In addition, there are peripheral wall frames and roof
supports of the house, which together form a spatial rigid
skeleton.
MATERIAL LIST FOR STEEL STRUCTURE BUILDINGS
| No. | Item | Details of steel structure building or steel frame |
| 1 | Material | Material | carbon structural steel |
| 2 | Produce | Lead time | Normallly 45days after down payment, also according to quantity. |
| 3 | Quality | Certification | Quality certificate from factory, the third party by client
request. |
| 4 | Dimensions | Length | H beam: 4000-15000mm |
| 5 | Thickness: | web plate: 6-32mm |
| 6 | wing plate: 6-40mm |
| 7 | Height | 200-1200mm |
| 8 | Color | According to customers |
| 9 | Size | MOQ is 1000 m2, width * length * eave height, |
| 10 | Main components | Base | Cement and steel foundation bolts |
| 11 | Main frame | H Steel beam, Q235 Q345 steel H beam and columns, painted or
galvanized, box steel, galvanized C section or steel pipe |
| 12 | Secondary frame : | galvanized C or Z purlin , steel bracing , tie bar , knee brace
,flashing etc. |
| 13 | Material | Q235B, Q345B or others as buyers' requests, like: ASTM, BSEN, DIN,
IPE,AISI,JIS, |
| 14 | Purlin | C or Z purlin: Size from C120~C320, Z100~Z20 |
| 15 | Column | X-type, tree type ,lattice, Cross, Box etc. |
| 16 | Bolt | Plain bolt and High-strength bolt |
| 17 | Roof & wall | PU sandwich panel, Rockwool sandwich panel or Corrugated steel
sheet |
| 18 | Canopy | steel sheet, PU sandwich panel, Rockwool sandwich panel |
| 19 | Door | Sliding or rolling door |
| 20 | Window | Aluminium alloy window |
| 21 | Surface | Two lays of rust-proof painting or Hot Dip Galvanized |
| 22 | Sheet | 0.5mm or 0.6mm galvanized sheet |
| 23 | Accessories | Semi-transparent skylight belts, Ventilators,down pipe, Galvanized
gutter, Trim, flashing, etc |
| 24 | Finishing options | Vast array of colors and textures available, Alkyd painting, two
primary painting, two finish painting (gray paint, red paint, white
paint, epoxy zinc etc.). Or Galvanized. |
| 25 | Usages | 1. Steel workshop, steel warehouse, steel structure plant |
| 26 | 2. Steel web frame structure |
| 27 | 3. Steel H-column and steel H-beam |
| 28 | 4. Portal frame products |
| 29 | 5. High rise building project |
| 30 | 6. Others steel structure buildings |
| 31 | Packing | 1. Container 20 feet: Inside: 5.69m x 2.34m x 2.18m, Gross weight:
17.5 ton, volume is 24-26m3.
2. Container of 40 feet: Inside: 11.8m x 2.34m x 2.18m, Gross
weight: 22 ton, volume is 54m3.
3. HC container: Inside: 13.58m x 2.34m x 2.71m, Gross weight: 29
ton, volume is 68m3.
4. All of the steel columns &beams ends and plates will be
packed by the blanket to protect them from the crash in the
container during the shipment. |
| 32 |
| 33 |
| 34 |
OUR SERVICE FOR STEEL STRUCTURE PROJECT:
1.Structural steel fabrication, painting , galvanizing ,
pre-assembly
2. Designing, fabrication and installation for Prefabricated steel
structure building.
3. Deepen or design the fabrication drawing or shop drawing based
on your architectural drawing and construction drawing
4. Engineering consulting service
OUR STEEL STRUCTURE FABRICAITON FACTORY:
The floor space of our steel structre fabrication factory is
35,000㎡, and the workshop area is 20000㎡. We own three light/heavy
H steel production lines, BOX production lines, C/Z purlin
production lines and various types of profiling steel sheet
machines with advanced equipment such as plasma cutting machine.
