Large Span Steel Arch Buildings Metal Arch Roof Truss Sheds For
Steel Material Storage
Introduction for Large Span Steel Arch Buildings Metal Arch Roof
Truss Sheds For Steel Material Storage:
Large Span Steel Arch Buildings Metal Arch Roof Truss Sheds For
Steel Material Storage. This Steel Arch Buildings Large Span Metal
Arch Roof Truss Sheds is used to store raw steel material. Welded
H-section steel columns and arch roof trusses are connected to be
the main steel frame structure. It also has a gantry crane in this
building. Large Span Metal Arch Roof Truss Sheds could provide
large space inside with high strength structure.
Prefabricated frame steel structure building can be applied to
factories, warehouses, workshop buildings, hangars, etc. Suitable
for single-story, large-span buildings. The building is simple, the
construction period is short, all the components are prefabricated
in the factory, which greatly shortens the construction period. The
cost is reasonable, the steel structure is light in weight, the
foundation cost is reduced, the construction speed is fast, and it
can be completed and put into operation as soon as possible. The
comprehensive economic benefits are much better than the concrete
structure buildings.
Project information for this prefabricated steel structure
workshop:
| Name | Large Span Steel Arch Buildings Metal Arch Roof Truss Sheds For
Steel Material Storage |
| Structure Type | Arch Roof Truss, single span |
| Length | 90m |
| Width | 40m |
| Eave Height | 12m |
| Roof Slope | 10% |
| Gable Wall Column Spacing | 7.5m |
| Roof | Corrugated steel cladding sheet |
| Wall | Corrugated steel cladding sheet |
| Door | Sliding door |
| Window | Ribbon Skylight |
| Height difference between indoor and outdoor | 300mm |
Steel structures material list and technical parameters:
| Main Steel Frame System |
| Main structure | H section steel Q355, alkyd painting, two primary painting, two
finish painting. |
| Roof purlin | XZ160*60*20*2.5, galvanized |
| Wall purlin | XZ160*60*20*2.5, galvanized |
| Intensive bolt | Grade 10.9 |
| Turn buckle bolt | M20+2, steel Q235, processing |
| Anchor bolt | M24, steel Q235, processing |
| Ordinary bolt | Galvanized bolt M20 |
| Ordinary bolt | Galvanized bolt M12 |
| Brace nut | Galvanized bolt M12 |
| Bracing System |
| Cross brace | Φ20 round steel bar Q235, process and painted (alkyd painting) |
| Angle brace | L50*5 angle steel Q235, process and painted (alkyd painting) |
| Column bracing | Φ25 round steel bar Q235, process and painted (alkyd painting) |
| Tie bar | Φ127*3 steel pipe Q235, process and painted (alkyd painting) |
| Batter brace | Φ32*2.5, Φ12 round steel bar Q235, process and painted (alkyd
painting) |
| Wall & Roof System |
| Roof panel | Corrugated steel cladding sheet |
| Wall panel | Corrugated steel cladding sheet |
| Edge cover | 0.5mm color plate, angle Alu. |
| Fittings & accessories | Nails, glue etc. |
| Unpowered ventilator | Diameter Φ600, stainless steel |
| Sky lighting band | 1.2mm FRP, double layer |
| Sliding door | sandwich panel door |
| Roof drainage system |
| Gutter | 0.5mm color steel plate |
| Rainspout pipes | Φ110 PVC pipe |
Our steel structure fabrication factory:
The floor space of our steel structre fabrication factory is
35,000㎡, and the workshop area is 20000㎡. We own three light/heavy
H steel production lines, BOX production lines, C/Z purlin
production lines and various types of profiling steel sheet
machines with advanced equipment such as plasma cutting machine.
Our service:
1. Structural steel fabrication, painting , galvanizing ,
pre-assembly
2. Designing, fabrication and installation for Prefabricated steel
structure building.
3. Deepen or design the fabrication drawing or shop drawing based
on your architectural drawing and construction drawing
4. Engineering consulting service
Packing and transport:
All the structure components, panels,bolts and sort of accessories
will bewell packed with standard package suitable ocean
transportation and loaded into 40’HQ.
All the products are loaded at the loading site of our factory
using crane and forklift by our skilled workers,who will prevent
the goods to be damaged.
